Tractizer [TC-C1]

Tractizer [TC-C1]

  • Characteristic
  • Features
  • Product
    specification
Tractizer [TC-C1]

The original tilting mechanism brings about a new style in cervical traction force treatment

With the TractizerTC-C1, contrary to previous cervical traction force unit, by controlling the seat tilting angle, a traction force position suitable for the treatment area can be provided. In addition, the high reproducibility of the traction force position encourages continuous treatment benefits.

Reproducibility and a diverse array of functionality raise the quality of traction force

With the tilting function, traction force can be performed at an angle suited to the treatment area
With the tilting function, traction force can be performed at an angle suited to the treatment area

In cervical traction force treatment, the part on which the traction force operates changes according to the traction force angle (table below). With the previous traction force unit, the structure was such that the traction force angle was changed by contracting and extending the upper arm. For this reason, as traction force is applied, the upper body leans forward and the traction force angle tends to become shallower than the set angle, and it becomes difficult to maintain a suitable traction force angle.
With the TractizerTC-C1, the adoption of the tilting function has resolved this issue. By controlling the slant of the seat, traction force can be performed at an angle suited to the treatment area.

Treatment area Upper cervical vertebrae Mid cervical vertebrae Lower cervical vertebrae
Traction angle 10°～15° 15°～30° 30°～40°
The traction force position can be set simply from the operating panel

※The products up till now

The traction force position can be set simply from the operating panel

The traction force position settings can all be set from the operating panel. The seat can be automatically tilted by selecting an angle in accordance with the treatment area in 7 stages from 10° to 40°. There is no need to adjust the arm for each patient individually like before and this reduces the work of the staff.
Using the “wide traction force function”, multiple traction force angles can be set during 1 treatment.

traction force treatment is possible in a relaxed posture

During Tractizer TC-C1 treatment, the patient just lies deeply in the chair. The patient can relax while maintaining a stable treatment posture.
Through stability in the treatment posture and tilting, the reproducibility of the treatment conditions has been increased and this is very helpful for continuous treatment.

Just push the angle setting button
  1. Sets the traction
  2. Traction sustainable time/rest time can be set as desired
  3. Set the treatment time
  4. “Gentle mode” in which the traction speed is gentle
  5. “Step mode” in which it can be operated in stages up to the set traction
  6. Set wide traction
  7. Choose the angle and set the traction position
Just push the angle setting button

The traction force position can be set in 7 stages between 10° to 40°.
Upper position (10° to 15°), middle position (15° to 30°), lower position (30° to 40°)
cervical treatment-compatible. The traction force position setting can be operated by just pressing a button. The tilting mechanism means that the traction force angle has a high level of reproducibility.

Wide traction force function
Wide traction force function

Using the “wide traction force function”, multiple traction force angles can be set. Cervical traction force is performed by modifying the angle in turn in line with the settings input in advance.
This has enabled a wide range of traction force to be applied to each area.

traction force modes that can be selected

This comes with a wide variety of traction force modes, and in addition to the normal mode in which the traction force is gradually increased and gradually decreased, there is the “gentle mode” in which the traction force speed is approximately half the normal speed and also the “step mode” where it can be increased in stages up to the set traction force.

  • traction force modes that can be selected

    Gentle mode

  • traction force modes that can be selected

    Step mode

Merits for patients

This provides patients with a relaxing, comfortable treatment environment

New-type cervical unit that uses traction force very efficiently
New-type cervical unit that uses traction force very efficiently

The new-type cervical vertebrae tool uses its expansion and contraction structure to control the traction force angle in a flexible way and transmit the traction force in a well-balanced way to the cervix. The feeling of fitting is improved with expanding and contracting materials and this reduces the load on the chin.

Voice guidance and relaxation sounds

The actions of the treatment unit, such as “starting the treatment” and “the treatment has finished” are notified by voice guidance in advance, giving peace of mind to the patient. Further, during treatment, relaxation sounds, consisting of “natural sounds” are played, and this alleviates nervousness.

Seat that takes into consideration the comfort of the patient

With the TractizerTC-C1, the patient just relaxes back in the seat. Consideration has been given to making the seat more relaxing.
As the seat is tilted in the towards the center of the cervical vertebrae, there is a short distance for the head to move, which reduces the discomfort of the patient.

Even more relaxing with a cervical pad
Even more relaxing with a cervical pad

A cervical pad with a built-in heater is attached as standard. The patient can relax and receive treatment comfortably.

Merits for medical staff

Design that fits perfectly the interior and space within the hospital

Space is not required at the back
Space is not required at the back

As it does not protrude to the back surface of the equipment when tilting, space at the back is not required. Layouts where it is placed by the wall or next to other equipment in the middle of the floor are possible.

Space saving design
Space saving design

Space saving design with width 640 mm × depth 1,130 mm × height 1,790 mm. The required area is virtually the same as the previous cervical traction force unit.

Gentle design

The design has a gentle non-intimidating form and this reduces the resistance of the patients to treatment. Further, there are 4 product colors in the lineup, and this allows you to coordinate with the interior of the treatment room (see product specification).

Gentle design

Specification

Classification of protection against electric shock Class 1 Type B
Main Supply 110Vac, 220Vac / 50/60 Hz 200 VA
Traction force position 7 stages (10°,15°, 20°, 25°, 30°, 35°, 40°)
Traction force 10 to 250 N (1.02 to 25.5 kg), 10 N unit
Accuracy: 90±15N, 250±40N
Treatment timer 1 to 99 minutes or continuous(1 minute unit)
Accuracy: ± 5%
Traction force continuation time 0 to 99 seconds or continuous (1 second unit)
Accuracy: ± 5%
Traction force rest time 0 to 99 seconds(1 second unit)
Accuracy: ± 5%
External dimensions*1 width640 × depth1,130 (1,400*2) × height1,790mm
Weight*2 100kg
Safety function Safety function Pinching detection function
Abnormal operation detection circuit

*1 Excluding accessories. *2 At maximum tilting

Outside Drawing

Outside Drawing

（unit：mm）

Color selections

Color selections

  1. lavender
  2. green
  3. pink
  4. orange