Physiotherapy

Polariskine [PO-3i/PO-S]

Characteristics
Features
Product
specification

The electric stimulation “Super tidal wave” has smashed the concept of treatment devices that has existed until now.

The lineup of the new-type wide range treatment device Polariskine has emerged with a lightweight design slim fit electrode attached and a standing remote controller (option) to enable remote operation.

The “durability” that is the feature of low frequency stimulation and stimulation of the “surface” motor point（※1）.The “immediate effect” of high frequency stimulation and stimulation of “deep structure” motor points. The tidal wave breeds a sense of "strong" stimulation（※2）. Wave with a sense of “comfortable" stimulation. The electric stimulation “Super tidal wave” that unifies these conflicting elements has smashed the concept of treatment devices that has existed until now.

The stimulation that continually presses in a rhythmical way from the surface to the depths of the treated area increases the blood flow and this promises to lead to benefits in pain relief. Further, the “COMBI” and “tidal 2 mode”, which perform treatment in quadrupole and the “tidal 4 mode”, which can achieve changing senses of stimulation over a wide area through eight electrodes, can separate their use according to their respective treatment content.

PO-3i
PO-S

※1Motor pointsAreas most reactive to electric stimulation

※2Tidal waveThe “tidal wave”, which is the basic waveform of Polariskine stimulates rhythmically using different frequency waveforms one by one from the surface layer to the deep structures within the body.

“Super tidal wave” produces a large muscle contraction with bipolar electrodes

“Super tidal wave” was uniquely developed by delivering mid-frequency waves to the target area, to relieve pain and discomfort when breaking through the skin barrier, and also efficiently delivers energy into the body. Furthermore, the stimulation combining a wide range of frequencies causes strong contractions of various muscles.
- “Feeling of treatment” that spreads three-dimensionally
- A “sense of persistence” that remains strong even after treatment is complete

Treatment modes that can handle a wide variety of symptoms

By selecting the various modes depending on the treated area, it can respond to a wide variety of symptoms. Further, in the various modes of super tidal, pulse tidal and hybrid tidal, it is possible to set it as “COMBI” using 2 channels.

Super tidal mode [compatible models: PO-3i/PO-S]

This is a treatment mode that uses bipolar electrodes. With a treatment wave combining the strong stimulation tidal wave and comfortable stimulation “wave” wave, a new sense of treatment not seen before can be achieved. This is the mode in which the sense of persistence lasts longest after treatment.

Pulse tidal mode [compatible models: PO-3i/PO-S]

In the same way as with Super tidal, this mode performs bipolar treatment. This wave-like, comfortable stimulation was mixed with a strong tapping stimulation sense. Treatment involving little pain and discomfort when the power is on.

Hybrid tidal modes [compatible models: PO-3i/PO-S]

This mode performs bipolar treatment by combining Super tidal and Pulse tidal.

Tidal 2 mode [compatible models: PO-3i/PO-S]

This is a mode in which treatment is performed using 2 output quadrupole electrodes suitable for a wide range of treatment. As the 2 outputs interfere with each other, treatment of deep areas using soft stimulation is possible.

Tidal 4 mode [compatible models: PO-3i]

This is the mode for carrying out continuous stimulation over positions in a wide area using 4 output eight electrodes. By stimulating with the 4 outputs in order, the sense of massaging up and returning can be achieved.

First appearance of the Polariskine, which is a popular item in the low frequency treatment field

Lightweight design slim fit electrodes

By making it much more lightweight, a lightness of approximately half that of the previous electrode (compared to ours) has been achieved. By limiting the suction required for adsorption, the risk of scarring in the patient’s skin due to suction has been reduced.

Thin design that is easy to attach under clothes

By preventing protruding of the central area of the electrode and connecting the cord to the side area,the previous thickness has been almost cut in half. In this way,it is easy to attach this to the back and shoulders etc.under your clothes.

PO-3i

Safety

Electrode Peeling Detection Function/ Maximum Output Restriction Function

The electrode peeling detection function monitors the attachment state of the electrode and if it detects that it is peeling or not completely attached, it controls its output and provides notification using a warning noise and display lights. Further, as the maximum output current value can be modified in line with the size of the electrode, treatment in a safe current density (2 mA/cm2 or below) are possible.

Attach a stopping key

In case of emergencies, the output can be stopped using one button.

Over current control function to prevent interruption of treatment

The output current is automatically controlled to prevent the output current exceeding the maximum current, which enables the treatment to be continued safely.

Safety design to prevent mishandling

The cover design has been created in a way that the electrode cord does not get caught on the output knob. This keeps cases of mishandling to a minimum.

Output volume lock function

When a certain amount of time passes from the start of treatment, the output is controlled so that it does not increase, and this prevents sudden changes in output due to mishandling. The function can be simply unlocked by returning the output volume to zero.

Operability

Voice guidance

The end of the treatment is notified by voice guidance.

Compact handy remote controller (option)
option

Possible to connect to CH 1, 3, 5, 7. Output electrode switchover, pumps and output handling are possible.

Respond to changes in treatment time midway through the treatment

Depending on the stetting, the treatment time can change during the treatment. This can respond to times when there are temporary extensions and reductions in treatment times based on the judgment of the physician.

Treatment display lights (option) by which the end of treatment can be confirmed with a glance
option

The state of each channel can be confirmed by light from a separated location.

Synchronized volume

As treatment is performed on multiple channels, such as “COMBI” “Tidal 2” and “Tidal 4”, the output of all channels can be operated with 1 volume. It is also possible to operate the volume for each channel and adjust the output in accordance with the position.

Comfort

Warming plate to support comfortable treatment

This is attached to the main unit top section and 2 side surface slide-type areas.

Mounted 4 new-type low noise pumps

A total of 4 low noise suction pumps are attached, with 1 pump every 2 channels, which compared to previous pumps, has a quiet operating noise with low vibration. It also includes an auto-power off function. As pumps do not operate any more than they need to, this supports energy saving and the long life of the pump.

Electrode cords with a gentle color scheme

Electrode cords with pastel colors matching the colors of each channel. Creates and easy-to-identify relaxed image.

PO-S

PO-S safety

Electrode Peeling Detection Function/ Maximum Output Restriction Function

The electrode peeling detection function monitors the attachment state of the electrode and if it detects that it is peeling or be not completely attached, it controls its output and provides notification using a warning noise and display lights. Further, as the maximum output current value can be modified in line with the size of the electrode, treatment in a safe current density (2 mA/cm2 or below) are possible.